Connecting RLS 45 O

RLS 45 O room air control is used to activate PPB 30 O units.

  1. Take off frame of room air control.
  2. Connect the PPBs according to the wiring diagram → appendix.

The exhaust air function is only possible if a PPB 30 O is connected (service mode setting for unit type = PPB 30 O and number of units = 1).

  1. Insert room air control in the flush-mounted box and screw down to flush-mounted box with 2 screws.
  2. Fit frame. Ensure that the sensor opening is above the PP 45 HYI (if fitted) and that the frame engages. Commission ventilation system → .